Plastic thermoforming machine DS650

Plastic thermoforming machine DS650 is (1) Faster cycle time (2) Lower consumption (3) Lesser materidl used best choice

Plastic thermoforming machine DS650 is

DS650   Description

Shot volume   2261/2/8623533     cm³Shot weight    2125/75.1       2690/95.1       3321/117.3     g/ozScrew diameter      80    90    100  mmInjection pressure   197  156  126  mpaScrew I/D ratio      23.5:1     21:1 19:1 Screw stroke  450  mmScrew speed(stepless)      0-140      rpmClamping force      6500       knOpening stroke       880  mmPlaten size      1340 x 1310   mm * mmSpace between tie bars   930x 900 mm * mmMax daylight   1880       mm * mmMold thickness(min-max) 390-1000 mmHydraulic ejection stroke       280  mmHydraulic ejection force 137  knEjector pin      12+1       Hydraulic system pressure     17.5 mpaPump motor   18.5+30  kwHeating capacity     33.2 kwNumber of temp control zones      6     Oil tank capacity    1000       LMachine dimensions(L * W * H)      8.75 x 1.91x2.31    m * m * mMachine weight      26000     kg

2,Environmental protection

Because it will not have the overflow to give off heat,the hydraulic pressure oil cooling water demand will only need the proportioning pumb machine 45%-65%.The good oil cleanliness control makes the hydraulic fluid live longer and the life is fiveyears longer under the normal use.

3.Power-saving

It can save the electricity from 30 %to 75%,compared to the ordinaty proportioning pumb machine.

4.Reliable

Resuction of oil temperature reduction lengthens the seal life greatly,and it is joined to the oil clean system whichs designs specially,filtering the greasy dir fast,guaranteeing the hydraulic system long-term reliable wok

5..Low noise

The rational design of the hydraulic control,the integration rate is high,and itpresses the loss to be small,reducting noise processing to make the complete machine movement steady uniquely tranquil.

6.Quality

  We sdopt the famous brand electronic rulers,which are made in Germany,Italian.

  The operating temperature scope is wide :-32±100degrees Celsius.The part and the material careful coice enables the sensor to have the extremely low temperature,the firm structure and the protection sensor suit in the bad environment use.The displacement operating lever undergoes the special surface treatment,which can reduce the friction to adapt to the high speed movement.

7.Quality assurance(ML6117)

1)Multi-language display(chinese and English are standard languages,custormercan add a third language when needed)

2)Intellingent SPC control

3)Long-disrance machine monotoring by internet

4)Dynamic graphic display of temperature

5)Alam record and data revision record

6)Auto-tune PID tempreture control

7)IO extension

8)Pre-heating or heat guarding function

9)Data-locking function

10)Screw cold start prebention

11)linear adjustment of accelerated

12)Decelerated RRMP

8.Camping unit

1)Strong or strenghthen platen design ensuring miuimun deformation.

2)High tensile platen with even force distribution,less deformation,enabling precision clamping.

3)Fast speed regenerative clamping function to meet woth special movement requirement.

4)Automatic mold adjustment by pressure and position for more convenience change of mold.

5)Low pressure mold protection.

6)Multi ejector mode for choice.

6)High precision imported linear transducer for clamping and ejection.

Plastic thermoforming machine DS650